Top 10 Woodworking Tool Sharpeners

We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality. Finer stones (6000 & up) require less soaking than coarser grit stones. These finer stones can actually be splashed with water when completely dry, and used immediately. They do not function quite as well this way as when they are soaked, but their rate of water absorption is slow enough to make this an acceptable method. The real reason why you should get the Wide Blade Attachment is that it will enable you to sharpen the tools with blades of up to 3 inches wide.

Each wheel can accept two abrasive pads and the Work Sharp comes delivered with 2 wheels. This ultimately means you have 4 grits available at all times. Furthermore, the sharpening https://ralphjoneswoodworking.com/ channel can handle blades from 1/8″ up to 2″ in width. The Work Sharp WS3000 also allows for the quick and easy re-hone of tools with a consistent 5° micro-bevel.

More Hand Tools

I’d been debating this purchase for almost two years. I hate sharpening tools and have gotten ok to good at sharpening with diamond stones and water stones, but I’m still not great at it. Woodcraft was having a special which included a free leather honing wheel, so I broke down and decided to buy the Worksharp 3000. Today, I spent several hours learning and using the tool. I would say that once I got the hang of it, it’s way faster and better than I had been doing with stones. As my stones had been done by hand before, they were close to a 25 degree bevel, but enough off that it took a while to clean up the bevel to 25 degrees.

No Jigs required – Sharpening port has precise and repeatable bevel angle settings of 20, 25, 30 and 35 for chisels and plane irons up to 2″ wide. I bought this tool primaraily to sharpen corrugated knives for my molding machine. Those knives are sharpened on the flat and doing this by hand on a piece of granite and sandpaper takes a unbelievable amount of time. It is fantastic for sharpening chisels and plane irons. Precise, perfectly sharpened edges that are as good as a professional sharpening service. When using this sharpener, first, adjust the angle on the sharpening port to the desired angle.

For mortise chisels, the honing angle should be 35 to 40 degrees, depending upon the wood. Hardwoods worksharp ws3000 review such as oak put tremendous stress on an edge. If the bevel angle is too shallow, the edge will chip.

Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network. Using a moderate downward pressure, pull it all the way across the entire surface. Repeat the process 5 times of more until the blade is thoroughly sharpened.

Excellent For Keeping Tools Sharp

Many of the products that we review are provided to us for free by a manufacturer or retailer. In some cases, we also have advertising or affiliate relationships https://ralphjoneswoodworking.com/worksharp-ws3000-review.htm with manufacturers and retailers of products and services we review. For additional information please visit our additional disclosure policies.

• The operation of the Work Sharp is really easy to get to grips with.
• As for sharpening knives without breaking the bank, go for the most affordable Work Sharp Belt Sharpeners if you have not already owned one.
• We will always strive for objectivity and transparency in our reviews.

I believe that the sharper the tool is the safer it is to use. I thought I’d go with a jig and stones, but when I compared costs the 3000 won out. My tools have never been this sharp, even out of the box. The WS3000 ships with solid and slotted abrasives to accommodate different sharpening applications to respect your individual tools. Jig-free angle guides and a large sharpening surface ensure every tool has a consistent, specific angle so they can perform their best.

Work Sharp Ws3000 Wood Tool Sharpener Specifications:

I just don’t see spending money on the honing wheel. The WS3000 includes 2 tempered glass wheels – giving you 4 abrasive surfaces to quickly and easily meet the sharpening task at hand. The WS3000 also comes with the innovative Edge-Vision wheel. This precise and speedy woodworking tool sharpener is ideal for repairing edges of planer blades, joint knives, lathe tools, and other edges.

I bought the guide table for it, I’m sure that’s a plus. The angle is a little off in the guide chute, so I’ll have to adjust that someday, when I get the time for it. Although we here at Sharpen-up generally prioritize our reviews of kitchen and hunting knife sharpeners, there is room for the odd review covering tools outside of this category. And what better way to do that than looking at the Work Sharp WS3000 wood tool sharpener. Admittedly, The Worksharp WS3000 tops the list of the best tool sharpener class.